All-inclusive pricing - see below.
Tecnodent Linda Next Italian Electric Medical Treatment Chair
Custom-made in Italy, the Tecnodent Linda Next is an advanced electric medical treatment chair designed for examinations, consultations, imaging, and professional office-based procedures. Its knee-break configuration allows the patient to sit while the chair is upright, before powered positioning transitions it into a reclined or flat working position.
The Linda Next offers three provider profiles with three programmable positions each, independent Trendelenburg movement, an automatically extending foot section, Slow Mode positioning, and hands-free joystick control. Seamless memory foam upholstery, a LIGHT multi-articulated headrest, and rotating armrests on both sides complete its premium clinical configuration.
Custom Made in Italy • FDA-Listed • Nine Programmable Positions • 661 lb. Combined Lifting Capability
Advanced Positioning for Medical Practices
The Linda Next combines the versatility of an electric medical examination chair with distinctive Italian styling. Its extensive positioning range enables efficient transitions between seated consultations, reclined examinations, imaging, and services requiring a flat patient surface.
The clean architectural design is well-suited to private medical offices, dermatology practices, plastic surgery offices, podiatry clinics, medical aesthetic facilities, and multipurpose examination rooms where function and appearance are equally important.
Italian Craftsmanship, Built to Order
Each Linda Next is manufactured in Italy after the order is placed. Tecnodent combines precision electromechanical engineering, molded polyurethane expertise, and carefully finished components to create a chair intended for dependable professional use.
The sculpted base, coordinated upholstery, and streamlined patient surface give the Linda Next a more refined appearance than a conventional examination table while preserving the adjustability required in a modern medical treatment room.
Exceptional 661-Pound Weight Capacity
With a manufacturer-rated weight capacity of approximately 661 pounds, this Tecnodent chair provides substantially greater support than many powered treatment and procedure chairs available in the United States. Capacities of approximately 450 to 550 pounds are common among comparable professional chairs, making Tecnodent’s higher rating an important advantage for practices seeking equipment that can comfortably accommodate a broader range of patients.
This capacity is especially impressive in a knee-break chair, where the articulating seat and leg sections make high-capacity engineering more difficult to achieve than with a conventional flat treatment table. Tecnodent combines flexible seated, reclined, and treatment positioning with the structural strength required for demanding professional use—without resorting to the oversized appearance of many high-capacity tables.
Convenient Upright Patient Entry
The Linda Next begins in a compact, chair-like position, allowing the patient to approach and sit before powered positioning begins. This upright entry format reduces the need to climb onto an elevated, fully extended examination surface.
Rotating armrests provide support during entry and exit and can pivot outward when open access to either side of the chair is preferred.
Automatically Extending Patient Surface
As the backrest reclines, the leg section moves in tandem, while the polyurethane foot section extends automatically. This synchronized movement lengthens the patient surface and maintains continuous support as the chair transitions from upright seating to a reclined or flat position.
The automatically extending foot section also allows the chair to accommodate different patient heights without requiring a separate manual adjustment.
Flat Table and Trendelenburg Positioning
The backrest moves through a range of 0 to 90 degrees, allowing the Linda Next to transition from upright seating to a flat working surface. Independent powered Trendelenburg movement provides an adjustment range of up to 21.5 degrees.
These positioning capabilities provide qualified facilities with additional flexibility in establishing an appropriate working angle for an examination or service, subject to professional protocols and the selected chair configuration.
Nine Programmable Working Positions
The Linda Next provides three provider profiles, each with three programmable positions. Up to three professionals can save and recall their preferred chair settings without having to recreate each adjustment throughout the day.
Built-in positioning programs include:
- Table position: Moves the chair into a flat working position
- Trendelenburg position: Activates independent powered tilt
- Upright position: Brings the patient into a more vertical seated position
- Last position: Returns the chair to its previously used working position
- Zero position: Returns the chair to its lowered patient-entry position
Hands-Free Joystick Control
A foot-operated joystick provides convenient control of chair height, recline, and programmed positions. Providers can reposition the chair without locating a wired handset or holding it during the adjustment.
An optional infrared remote control can also be added for operation from different locations around the treatment room.
Slow Mode for Fine Positioning
Slow Mode allows the provider to make small, controlled adjustments when more precise positioning is desired. This can be useful when aligning the patient with an examination light, imaging system, magnification equipment, or a particular working area.
Soft-start and soft-stop technology allows each powered movement to begin and end gradually.
Smooth Electromechanical Performance
The Linda Next uses low-voltage 24V DC linear actuators for powered lifting, lowering, backrest adjustment, Trendelenburg movement, and programmed positioning. Its electromechanical system is designed to provide controlled movement throughout the chair’s adjustment range.
With a lifting speed of approximately 0.87 inches per second, the chair can be repositioned efficiently while retaining smooth operation.
Flexible Treatment Room Configuration
The Linda Next is designed to provide open access from either side of the chair, allowing providers to select a comfortable working position for different examinations and services. Its symmetrical construction works equally well in right- or left-oriented treatment rooms.
As a standalone treatment chair, it can be positioned alongside the practice’s preferred examination light, imaging equipment, instrument cart, operator stool, and other supporting equipment.
LIGHT Multi-Articulated Headrest
Tecnodent’s LIGHT headrest positions the patient’s head along three axes. The provider can adjust its height, angle, and orientation independently of the main backrest, providing more precise head and neck support during upright, reclined, or flat positioning.
This multi-directional adjustment helps align the patient with the working area while reducing the need to reposition the entire chair. It can also provide useful flexibility during examinations, photography, imaging, and services requiring access from different clinical angles.
Dual Rotating Armrests
Rotating armrests on both sides provide additional support as patients enter, exit, and reposition in the chair. Each armrest pivots outward when open side access is needed and returns easily to provide comfortable arm support during consultations, examinations, and treatments.
Seamless Memory Foam Upholstery
Tecnodent uses viscoelastic polyurethane memory foam that responds to body heat and gradually conforms to the patient’s shape, helping distribute pressure more evenly for greater comfort during longer appointments.
The foam is integrated into seamless molded upholstery, combining supportive cushioning with a smooth, easy-to-clean surface suited to professional medical environments.
661 lb. Combined Lifting Capability
The Linda Next has a maximum combined lifting capability of 661 lbs. (300 kg). This rating includes both the patient and any equipment connected to the chair.
The 661 lb. specification should not be interpreted or advertised as a 661 lb. patient-only weight capacity.
Safety and U.S. Market Status
The Linda Next is FDA-listed for sale in the United States and complies with the applicable requirements of the European Medical Device Regulation MDR 2017/745.
Integrated safety stops are located at the backrest, leg section, and controls to help protect the chair, patient, and nearby equipment during powered movement.
Standard Features
- Custom-made in Italy and built to order
- FDA-listed electric medical treatment chair
- Upright knee-break patient entry
- Powered lifting, lowering, and backrest adjustment
- Backrest adjustment from 0 to 90 degrees
- Synchronized backrest and leg-section movement
- Automatically extending polyurethane foot section
- Independent powered Trendelenburg positioning
- Three provider profiles
- Three programmable positions per profile
- Nine total programmable working positions
- Automatic table, Trendelenburg, upright, last-position, and zero-position programs
- Slow Mode for fine positioning adjustments
- Foot-operated joystick control
- Low-voltage 24V DC linear actuators
- Soft-start and soft-stop movement
- LIGHT multi-articulated headrest
- Seamless molded memory foam upholstery
- Rotating armrests on both sides
- Symmetrical design for right- or left-handed professionals
- Safety stops at the backrest, leg section, and controls
- RAL 9003 white chair structure
Medical Applications
The Tecnodent Linda Next is suitable for professional environments that benefit from upright entry, powered height adjustment, precise head positioning, and the ability to transition to a fully reclined or flat patient surface. Potential settings include:
- General medical examinations and consultations
- Dermatology examinations and office-based services
- Podiatry consultations and examinations
- Plastic surgery consultations and follow-up appointments
- Medical aesthetic treatment rooms
- Clinical photography and digital imaging
- Specialty medical practices
- Multipurpose examination and procedure rooms
Suitability for a particular examination or procedure should be determined by the facility based on the selected configuration, required accessories, professional protocol, and applicable regulations.
Shipping and Fees
Please note that this chair is made to order and ships directly from Italy. The estimated production lead time is approximately four weeks, with delivery expected within 8–12 weeks from the date of purchase.
Your purchase price includes White Glove Delivery, which covers unloading the chair from the delivery truck, unpacking the equipment, placing it in your desired room or location, and removing all packaging materials and debris. White Glove Delivery does not include assembly, installation, or removal of existing equipment.
All applicable taxes are included in the purchase price.
For orders of two or more chairs, please contact us for a customized quote so we can provide the best available pricing.
Technical Specifications
- Minimum height: 19.7" (500 mm)
- Maximum height: 34.4" (875 mm)
- Backrest height adjustment: 2.4" (60 mm)
- Backrest tilt range: 0° to 90°
- Width: 24.8" (630 mm)
- Overall length: 78.7" (2000 mm)
- Trendelenburg angle: Up to 21.5°
- Lifting speed: Approximately 0.87" per second (22 mm/sec)
- Net weight: Approximately 309 lbs. (140 kg)
- Maximum combined lifting capability: 661 lbs. (300 kg), including the patient and connected equipment
- Classification: Class I
- Applied-part classification: Type B
About Tecnodent
Founded in Italy in 1966, Tecnodent designs and manufactures professional dental and medical seating. Through its Tecnocare division, the company produces medical treatment chairs, examination tables, and operator stools that bring together contemporary Italian design, precision engineering, specialized polyurethane craftsmanship, and rigorous multi-stage quality control.
As part of the Favero Health Projects Group, Tecnodent makes each chair to order at its facility near Venice, Italy, with upholstery and color options selected for each individual unit. The result is purpose-built clinical equipment for practices that value both performance and thoughtfully designed surroundings—not mass-produced furniture. Because each chair is made to order, please allow approximately 8 to 10 weeks from the time of order placement to delivery.
The Tecnodent Linda Next is intended for professional medical treatment environments. Lights, stools, carts, instrument trays, booster cushions, remote controls, and other accessories are sold separately unless expressly included in the selected configuration.
Upholstery Options:
Additional color options are available. Contact us for more information.
Available Upgrade Options
Infrared Remote Control – Operate the chair from different positions around the treatment room and conveniently store or recall programmed settings. The wireless remote can be used independently or together with the foot joystick.
Available Accessories
Protective Foot Cover - plastic cover designed to protect the chair from wear and tear.
Children's Booster Cushion – Improve seating height for younger visitors with a custom-fit booster cushion upholstered to match your selected chair color. Designed specifically for the Tecnodent Vale, it integrates seamlessly with the chair while maintaining a coordinated professional appearance.
Complete your treatment space with the Tecnodent Pluto Ergonomic Saddle Stool, designed for balanced, active seating and close access to the treatment chair. Its anatomical saddle seat features high-density memory foam and seamless, easy-to-clean upholstery, while adjustable seat height, seat tilt, backrest height, and backrest tilt allow the operator to personalize their working position. A single chrome-plated aluminum control handle provides convenient adjustment during the workday.
The Pluto also includes a stable polyurethane base with five rubber casters for comfortable foot support and smooth mobility. Suitable for dental, medical, aesthetic, and other clinical environments, this Italian-designed stool adjusts from 18.9" to 26.8" high and supports up to 298 lbs. Shown in Steel Blue. A chromed aluminum footrest ring is available. Contact us for additional information.
